Loading ...
Loading ...
Loading ...
USA-CAN - 25
Water Temperature
Hot water is needed for best dishwashing
and drying results. Water entering
dishwasher should be at least 120°F (49°C)
to give satisfactory results.
To check water temperature entering
dishwasher:
• Turn on hot water faucet nearest
dishwasher for several minutes to clear cool
water from pipes.
• Hold a candy or meat thermometer in
stream of water to check the temperature.
• If temperature is below 120°F (49°C),
have a qualified person raise the hot water
heater thermostat setting.
8. OPERATING THE PRODUCT
1 2 3 4 5 6
7
vi
İİİ
İV
i
İİ
V
1. Display
2. On/Off + Start/Pause Key
3. Program Selection + Cancel Key
4. Half Load Key
i. Upper Basket Half Load Led
ii. Lower Basket Half Load Led
5. Delay Timer Key
6. Options Key
iii. Sanitize Function Led
iv. Extra Fast Function Led
v. Extra Dry Function Led
vi. Hi-Temp Function Led
7. Rinse Aid Indicator
8.1. Keys
On/Off Key
This key is used as On/Off key if the
corresponding button is held down for 3
seconds. Otherwise, it can be used as
Start/Pause key. It is used to turn on or turn
off the machine. Machine will turn on with
Regular program and the number and the
duration of the regular program will appear
on the display. Each of program number
and the duration will sequentially represent
for 2 seconds on the display. In Off position,
the display will turn off.
Start/Pause Key
It is used to start or pause a selected
program and functions.
Program Selection/Cancel Key
It is used to select the washing program you
determined from the programs table.
The cancel key is activated when Program
Selection/Cancel Key is held down for 3
seconds.
Half Load Key
It is used to add Half Load functions to the
selected program.
Delay Timer Key
It should be pressed to make the time delay
settings.
Options Key
It is used to add auxiliary functions to the
selected program.
8.2. Preparing The Machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent dispenser.
5. Check if the Salt and Rinse Aid indicators
light and add salt and/or rinse aid if needed.
Loading ...
Loading ...
Loading ...