Loading ...
Loading ...
Loading ...
Choose "Stop program". The program is canceled and the water is pumped out of the machine if
necessary. Only then will you be able to open the washing machine door. Use the Program selector
knob to select a new program. If necessary, add detergent, and then press the Start /Pause
button.
INFORMATION!
If the temperature in the drum is very high, then cooling procedure starts before program is
canceled.
A washing program can be paused by pressing the ON/OFF button.
The washing machine will switch off.
After the washing machine is switched on, press the Start button to resume the program.
INFORMATION!
Do not open the detergent compartment while the appliance is operating.
INFORMATION!
In some cases the door may be locked although no program is in progress (e.g. in case of an
error). To unlock the door, press the Start/Pause button and hold it for a while.
STEP 8: End of program
After the end of the washing program, the display will indicate that the program has been successfully
completed and that the door is unlocked.
Open the door towards you and remove the laundry from the washing machine.
Make sure the washing machine drum is empty.
If you do not take any action within 5 minutes after the end of the program, the display will switch
off to standby mode in order to save power.
The display will light up again if you press the ON/OFF button.
WARNING!
After the washing cycle, close the water tap and pull out the washing machine plug from the
power socket.
If you have a washing machine with a 3phase connection, do not pull the plug out of the power
outlet.
29
Washing process step by step (1-8)
Loading ...
Loading ...
Loading ...