Loading ...
Loading ...
Loading ...
Wall Mounting
Before Wall Mounting the monitor,
download the app and complete the
pairing process. This will help ensure
optimal placement. The following
instructions are for securely mounting to
a drywall surface.
1 . Examine the room and determine the optimal placement on the
wall. Mark this location with a pencil. IMPORTANT: Ensure that
the baby monitor is at least 3 ft (0.9 m) away from the crib.
2 . Place the included wall mount onto the wall
at the marked location, ensuring the arrow is
pointing upwards. Using a pencil, make a mark
through the two screw holes. Put the wall mount
to the side for later use.
3 . Using a 3/16” drill bit, drill a hole 1.0” (2.54 cm) deep on the
pencil marks. DO NOT drill through the wall mount holes.
4 . Insert drywall anchor into the hole. If necessary, lightly tap
with a hammer until the drywall anchor is flush with the wall
surface. Note: If mounting to a wall stud, drywall anchors are
not required.
5 . Align the holes of the wall mount with the
drywall anchors and using a screwdriver,
hand tighten a screw into each of the drywall
anchors. DO NOT over tighten.
continued on next page
3’
(0.9 m)
(0.9 m)
3’
3’
(0.9 m)
(0.9 m)
3’
3’
(0.9 m)
8
Loading ...
Loading ...
Loading ...