Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
FILL IN DATES j_'_._ _ _..>'__-.t_'_ ,_,_; A._' ,q.'< ,q._ _
AS YOU COMPLETE _/_._0_ __ .......
REGULARSERVICE _,1_ Y _ _.."_/¢'_ _.'_.:/_,_" SERVICE DATES
Check Brake Operation _1_ _1
Check Tire Pressure
T Check for Loose Fasteners I_ V'7 ¥4
R
Sharpen/Replace Mower Blades 11_4
LubricationChart !
T Check Battery Level/Recharge
Clean Battery and Terminals
R CheckTransaxleCooling If
AdjustBlade Belt(s) Tension VPs
AdjustMotion Drive Be_t(s)Tension Vts
Check Engine Oil Level V _ I
Change Engine Oil V' I_t_.3 I V #
Clean Air Filter V'2
E
N Clean Air Screen 1112
G InspectMuffler/Spark AtTester
I Replace Oil Filter(If equipped) Ik_1.2
N C_eanEngine Cooling Fins V'2
Replace Spark Plug II_ if
V'2Replace Air FilterPaper Cartridge
Replace Fuel Filter V'
1 - Change rn_e often when operating under a heavy load or in high ambient temperatun_.
2 - Service more often when operating in dirty or"dusty cond'_ons.
3 - If equ_ped with oilfilter, change oilevery 50 hours.
4 - Replace btades more often when mowing in sandy soil.
5 - If equipped with adjustable system.
6 - Not required if equipped with maintenance-free battery.
7 :Tighten front axle pivot boltto 35 ft.-Ibs, maximum.
Do not overdghten.
GENERAL RECOMMENDATIONS
LUBRICATION CHART
The warranty on thistractor does not cover itemsthat have (_
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made periodically to (_
properly maintain your tractor. BEARINGZERK
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for
wear. A new spark plug and clean air filter assure
proper air-fuel mixture and help your engine run better (_) CLUTCH
and last longer. PIVOT(S)
BEFORE EACH USE
Check engine oil level.
Check brake operation.
Check tire pressure.
Check for loose fasteners.
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUSLUBRI-
CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY. POW-
DERED GRAPHITE TYPE LUBRICANT SPARINGLY.
• FRONT WHEEL (_
BEARING ZERK
(D
PIVOTS
(_SAE 30 OR 10W30 MOTOR OIL
(_)GENERAL PURPOSE GREASE
(_REFER TO CUSTOMER RESPONSIBILITIES "ENGINE" SECTION
15
Loading ...
Loading ...
Loading ...