Loading ...
Loading ...
Loading ...
NOTE:Cruise control cannot be engaged at the tractor's fastest ground speed. If the operator should attempt to de
so, the tractor will automatically decelerate to the fastest optimal mowing ground speed.
To disengage the cruise control, lightly depress either the brake pedal or the drive pedal.
To change to the reverse direction when operating with cruise control, depress the brake pedal to disengage
the cruise control and bring the tractor to a complete stop. Then place the shift lever in the REVERSE position
and depress the drive pedal.
SeatAdjustmentLever
To adjust the seat position, loosen the two seat adjustment knobs and reposition the seat to the desired position.
Once a comfortable position is found, tighten the adjustment knobs to lock the seat in place.
DeckLiftLever
The deck lift lever is used to change the height of the cutting deck. To use,
move the lever to the left, then place it in one of the six notches best suited
for your application.
To set the cutting height of the deck you will also have to adjust the deck
wheels so that they are between 1/4-inchand ½-inch above the ground when
the tractor is on a smooth, flat surface such as a driveway, refer to Deck
Levelling instructions on page 14.
NOTE: The deck wheels are an anti-scalp feature of the deck and are not
designed to support the weight of the cutting deck.
CargoNet
Conveniently located on the tractor's dash panel, the cargo net can be used to store personal items while operating
the lawn tractor.
CupHolder
The tractor's cup holder is located on the fender to the left of the seat, just to the rear of the parking brake lever.
The safety interlock system prevents the engine from
cranking or starting unless the parking brake is engaged,
and the PTO lever is in the "Blades Stop" position. Ifthis
system should ever malfunction, do not operate the
tractor, immediately contact a Troy-Bilt dealer.
The safety interlock system will automatically shut off
the engine if the operator leaves the seat before
engaging the parking brake.
The safety interlock system will automatically shut off
the engine if the operator leaves the tractor's seat with
the PTO (Blade Engage) lever in the ON position,
regardless of whether the parking brake is engaged.
The safety interlock system will automatically shut off
the engine if the PTO (Blade Engage) Lever is moved
into the engaged (ON) position with the drive pedal in
position for reverse travel.
IMPORTANT: Tampering with or attempting to bypass the
tractors Safety Interlock Switches in any way will void your
tractor's warranty.
WARNING
AVOIDSERIOUSINJURYORDEATH
• GO UP AND DOWN SLOPES, NOT ACROSS.
• AVOID SUDDEN TURNS.
• DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIR
• iF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK
DOWNHILL SLOWLY.
• DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.
• NEVER CARRY CHILDREN, EVEN WITH BLADES OFE
• LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.
• KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) tN
PLACE AND WORKING.
• REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).
• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.
• BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLAC-
ING HANDS OR FEET NEAR BLADE(S).
• BEFORE LEAVING OPERATOR'S POSITION, DISENGAGE
BLADE(S), PLACE THE SHIFT LEVER iN NEUTRAL, ENGAGE
BRAKE LOCK, SHUT ENGINE OFF AND REMOVE KEY.
READOPERATOR'SMANUAL
_ WARNING: Do not operate the tractor if the interlock system is malfunctioning. This system was
designed for your safety and protection.
11
Loading ...
Loading ...
Loading ...