Loading ...
Loading ...
Loading ...
30 (800) 449-8691
Surface Burners
• Push in and turn the burner knob counterclockwise
past HIGH towards LOW to start the ignition
process. The ignitor will spark and make a clicking
sound, which will stop after the burner ignites. After
ignition, it may take a few seconds for the gas to
reach all the ports. For best results, light the burner
with a pot or pan on top of it.
• Once the burner is lit, turn the knob to your desired
setting.
• Turn the knob to OFF to extinguish the burner. The
ame may linger for several seconds until all the gas
in the tube is burned off.
• Burners have a reignite feature in case the ame is
extinguished. However, it may take several seconds
for the burner to reignite.
Important: Never operate the burner with knob set
between the HIGH and OFF positions. The ame will not
reignite in this position and a gas leak could occur.
Griddle Air Duct Cover (select models)
The griddle air duct cover may become discolored from
normal use or cooking oils, etc. It can be removed for
cleaning. Wait for it to cool to room temperature and lift
it up to remove it.
Griddle Grease Tray (select models)
The griddle grease tray can be removed to dispose of
the grease and for cleaning. Wait for it to cool to room
temperature, lift it up and tilt it back to remove it. Check
the grease tray after each use to prevent overowing.
Operation
Standard Racks
Remove
1. Grasp both sides of the front of the rack.
2. Slightly lift the rack up, then pull the rack until the
ball tabs on the bottom of the rack clear the rack
guide.
3. Continue to pull the rack all the way out of the oven.
Replace
1. Hold both sides of the rack and align the rack onto
the rack guide position you want to use.
2. Push in the rack up to the ball tabs, then slightly lift
the rack until the ball tabs are past the front of the
rack guide.
3. Set the rack onto the rack guide, then push the rack
into the oven the rest of the way until the rear hook
tab stops at the rear vertical rack guide bar.
Guide rack
Rear hook tab
stopped at
rear vertical
rack guide bar
Standard rack
fully inserted
Ball tab
Air duct cover
Loading ...
Loading ...
Loading ...