Loading ...
Loading ...
Loading ...
bluestarcooking.com 19
Tools and Materials
• Phillips screwdriver
• Level
• Gloves and safety glasses
Step 1 — Uncrate and Inspect the Range
Uncrate and inspect the range. Remove the packing
materials but do not discard the anti-tip bracket,
temperature probe, user manual, etc.
Step 2 — Install the Anti-Tip Bracket
Important: An anti-tip bracket is required for all ranges.
You must install the anti-tip bracket before installing the
range to reduce the risk of tipping.
Attach the anti-tip bracket using the measurements
below.
Installation Instructions
Cet appareil est lourd et bascule facilement lorsqu'il
n'est pas complètement installé. Utilisez deux
personnes ou plus pour déplacer et installer la
cuisinière. Le non-respect de ces instructions peut
entraîner la mort ou des blessures graves.
This appliance is heavy and tips easily when not
completely installed. Use two or more people to move
and install the range. Failure to follow these instructions
can result in death or serious injury.
Step 3 — Detach the Door
1. Open the door all the way.
2. Holding onto the door, push the latch at the top of
each hinge downwards to lock the hinge.
3. After the hinges are locked, lift the door slightly,
then pull the hinge arms out of the hinge
receptacles to remove the door.
4. Lean the door against a wall or cabinet with the
handle towards the oor and facing the wall to
prevent the hinge latches from coming unlatched.
Use padding beneath the door to prevent scratching
or damage
Step 4 — Remove the Oven Racks
See page 31 for instructions.
Keep ngers away from the door hinges after removing
the door. The hinges have strong springs that can snap
closed if impacted, which can cause injury.
CAUTION
Éloignez les doigts des charnières de la porte après
avoir retiré la porte. Les charnières ont des ressorts
solides qui peuvent se refermer en cas de choc, ce qui
peut causer des blessures.
MISE EN GARDE
AVERTISSEMENT
WARNING
Latch
From the left side of the edge of the range
BSDF30, BSDF48, BSDF60—8 1/2” (215.9 mm)
BSDF36—11 1/2” (292.1 mm)
Anti-tip bracket
should be
secured to the
oor and the
back wall.
Loading ...
Loading ...
Loading ...