Loading ...
Loading ...
Loading ...
8
REVERSING THE DOOR HINGE
It is possible to reverse the door on this appliance, if
required.
To do so, follow the steps below:
FOR MODEL CAV80X
1. Remove the ventilation grille
○
2 and/or the
adjustable ventilation grille
○
1 by unscrewing
the screws
○
3 &
○
4 . (Fig. 1)
2. Remove the bottom hinge
○
5 by unscrewing
the four lock screws
○
6 . Be careful to hold the
glass door firmly after removing the screws.
(Fig. 2)
3. Gently pull down to remove the glass door
from the right top hinge and place it on a
padded surface to avoid the risk of damage.
Then remove the right top hinge
○
9 . (Fig. 4)
4. Unscrew and transfer hinge pin
○
7 and/or
door stopper
○
8 of the bottom hinge to the
opposite side. (Fig. 3)
5. Pop out the cover caps on the left side of
cabinet and use them to cover the screw holes
on the right hand side.
6. Screw the alternative left top hinge
○
11 ,
included in the fittings, on the left hand side of
cabinet. (Fig. 4)
7. Unscrew and transfer the holes cover
○
12 and
lock catch
○
13 to the opposite side of glass
door. (Only for models with lock on the
ventilation grille) (Fig. 5)
8. Rotate the door 180° and relocate the door to
the designated position. Then screw the
bottom hinge assembly on the left designated
position and tighten it after the door is leveled.
FOR MODEL CB377V
3
2
6
7
11
6
4
5
1
3
1
1. Remove both plastic covers
○
1 then remove
the bottom hinge
○
3 by unscrewing the four
lock screws
○
2 . Be careful to hold the glass
door firmly after removing the screws. (Fig. 1)
2. Gently pull down to remove the glass door from
the right top hinge and place it on a padded
surface to avoid the risk of damage. Then
remove the right top hinge
○
10. (Fig. 4)
3. Pop out the cover caps on the left side of
cabinet and use them to cover the screw holes
on the right hand side.
4. Screw the alternative left top hinge
○
9 , included
in the fittings, on the left hand side of cabinet.
(Fig. 4)
5. Unscrew and transfer door supporter
○
11 to the
opposite side. At the same time remove the
stopper pin
○
8 to the alternative designated
position of the same bottom hinge or unscrew
and transfer the hinge pin
○
8a to the alternative
designated position of the same bottom hinge.
(Fig. 5 & 3)
6. Unscrew and transfer the door adapter
○
6
and/or lock catch
○
5 to the top designated
position of glass door. (Fig. 2)
7. Relocate the glass door to the designated
position. Then screw the bottom hinge on the
left designated position and tighten it then
reinstall back both plastic covers. (Fig. 5)
8. Recheck and adjust the door alignment by
Note: All parts removed must be
saved to do the reinstallation of door.
Loading ...
Loading ...
Loading ...