Loading ...
Loading ...
Loading ...
10
UP
To increase (warm) the set temperature by 1°C or
1ºF.
DOWN
To decrease (cool) the set temperature by 1°C or
1ºF.
LIGHT
To control the inner light turn on/off.
Display
Display the digital temperature and service
indicators.
is for UPPER temperature zone and is for
LOWER temperature zone.
Indicator Light
The indicator light is located at the right lower corner
of the display. The indicator light will be on when the
multi-key function is selected. To perform the multi-
key function, press and hold the first key, then press
the rest key for at least 5 seconds and then release
all the keys.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit
or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit,
press and hold the LIGHT key for 5 seconds.
Setting the Temperature Control
The unit has two separate temperature zones.
The temperature of both zones can be set
between 5ºC and 20ºC (41ºF and 68ºF). It can
be used as a wine maturing cabinet or a wine
serving cabinet. For maturing wine, the
recommended temperature setting ranges of
both zones should be between 11ºC and 14ºC
(52ºF and 57ºF). For serving wine, the
recommended temperature setting range of
UPPER zone should be between 5ºC and 10ºC
(41ºF and 50ºF) which is ideal for serving
champagne & white wine and the
recommended temperature setting range of
LOWER zone should be between 15ºC and
20ºC (58ºF and 68ºF) which is ideal for serving
red wine.
When the unit is plugged in for the first time, the
unit will power up automatically to the preset
defaults. The preset temperature at the factory
for UPPER temperature zone is 10ºC (50ºF) and
for LOWER temperature zone is 16ºC (60ºF).
You can press the left side UP and DOWN keys
to control the internal temperature of the UPPER
temperature zone and press the right side UP
and DOWN keys to control the internal
temperature of the LOWER temperature zone.
When you press the two keys at the first time,
the display will show the last temperature set
previously.
NOTE: The temperature set for the LOWER
temperature zone must always be just as high or
higher than that in the UPPER temperature zone.
For optimal performance, the set temperature of
the two zones should differ by at least 4°C.
The temperature that you desire to set will
increase 1ºC or 1ºF if you press the UP mark
once, on the contrary the temperature will
decrease 1ºC or 1ºF if you press the DOWN
mark once. The display flashes while you make
the setting.
The display always shows the SET temperature.
The SET temperature will flash if the actual
temperature in the zone deviates by more than
5°C from the SET temperature.
TEMPERATURE DISPLAY
During normal operation, the temperature display on
the control panel always shows the SET
temperature. The temperature display will flash if
- A different temperature is being set,
- The temperature in the zone deviates by more
than 5°C from the set temperature.
The temperature display flashing ensures that the
temperature can not rise or fall un-noticed and
impair the wine.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge,
breaker switch, etc.), the unit can remember the
previous temperature settings, and when the power
is recovery, the cabinet temperature will go back the
same setting temperature as power off.
TEMPERATURE ALARM
An audible alarm will sound if the temperature in
one of the zones rises or falls outside the
temperature range. The relevant temperature
display will flash at the same time.
Loading ...
Loading ...
Loading ...