QUICKSTART
5.965-279.0 01/14
All-round deep cleaner RM 754 ASF
Removal of soiling
몇 WARNING
These are only brief instructions! Please read the product information and observe the safety information
on the product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
Preparation
1
ABCA Determine coating (e.g. paper clip test).
The all-round deep cleaner can be used on
all coatings insensitive (e.g. PCV / PUR) and
sensitive to alkali (e.g. linoleum).
B Select and prepare the machine and acces-
sory that is suitable for the floor covering.
C Dose the deep cleaner according to the level
of the soiling to be removed (approx. 10-
20%).
Deep cleaning
2
A B C A Apply deep cleaner solution, do not vacuum
off.
B Allow deep cleaner solution to react accord-
ing to the level of soiling (approx. 2-5 minutes,
maximum 10 minutes).
C Clean floor covering with the cleaning ma-
chine. Vacuum off the dirt.
Note
In case of excessive dosage and/or a reac-
tion time that is too long, there is a risk of the
care film peeling off.
Removing residues
3
AB A Post-clean the floor covering with clear water
until all detergent and dirt residues are re-
moved.
B Prior to a new coating, the floor covering must
be dry and free of dust, the pH-value must be
7-8.5.
Clean machine and accessories immediately af-
ter use.
QUICKSTART
5.965-279.0 01/14
All-round deep cleaner RM 754 ASF
Removal of care films
몇 WARNING
These are only brief instructions! Please read the product information and observe the safety information
on the product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
Preparation
1
ABCA Determine coating (e.g. paper clip test).
The all-round deep cleaner can be used on all
coatings insensitive (e.g. PCV / PUR) and
sensitive to alkali (e.g. linoleum).
B Prepare and hold available the machine and
accessory that is suitable for the floor
covering.
C Dose the deep cleaner according to the
thickness of the care film to be removed
(approx. 20 - 30%, max. 50%).
Removing the care film
2
A B C A Apply deep cleaner solution, do not vacuum
off.
B Allow deep cleaner solution to react accord-
ing to the thickness of the care film to be
removed (approx. 5-10 minutes).
C Mechanically treat the floor covering again
after the reaction time, then
vacuum off the dirt.
Removing residues
3
ABCA Post-clean the floor covering with clear water
until all detergent and dirt residues are re-
moved.
B Check pH-value. Repeat the post-cleaning
until a pH-value of 7 - 8.5 is reached.
C Prior to the new coating, the floor covering
must be dry and free of dust.
Clean machine and accessories immediately
after use.
