CI8-150DSP Owner's Manual

Loading ...

ENGLISH

OPERATION

OUTPUT SETUP

NAME

• The factory default names of the eight OUTPUT channels are Output

1 up to Output 8. Each OUTPUT channel can be renamed by directly

typing over the specic OUTPUT. For example, type over “OUTPUT 1”

with the desired name or label like “Living Room”.

• The eight OUTPUT channels correspond to the SPEAKERS 1 to 8

respectively.

INPUT

• Each OUTPUT channel can be assigned any of the INPUT channels (Line

1-8, Optical 1-2 and Coaxial 1-2). Assign a particular OUTPUT channel

with a source INPUT by selecting preferred line INPUT number from the

drop down tab.

GAIN OFFSET

• Gain oset allows output channel levels to be adjusted independently.

• Grab the pointer of the GAIN OFFSET knob icon and rotate to adjust

gain level within ±6 dB range at 0.5 dB increments. The corresponding

numerical value of adjusted gain oset level is reected below the

knob icon. You can also type directly desired gain oset value in the

section below the GAIN OFFSET knob icon.

PRESET

• Designate a DSP Preset number for the particular Output Channel.

Ensure that the DSP Preset number you allocate has been previously

setup and saved.

BRIDGE MODE

• Combine both adjacent output channels into Mono output by setting

“Bridge Mode” to “On”. Set “Bridge Mode” to “O” to maintain stereo

output.

• Refer also to item about "SPEAKERS (1-8)" under "IDENTIFICATION OF

CONTROLS" for further information and guideline about Bridge Mode.

DSP

PRESETS

OUTPUT CHANNEL/OUTPUT NAME/DSP PRESET

• Output Channel, Output Name and DSP Preset are combination

settings that can be modied at the PRESETS section of DSP menu or

OUTPUT SETUP in the INPUT/OUTPUT menu.

• Assign an Output Channel with an Output Name that can either be the

default name or by typing over desired Output name. Designate a DSP

Preset number for the particular Output Channel. Ensure that the DSP

Preset number you allocate has been previously setup and saved.

• Any changes in Output Channel, Output Name and DSP Preset settings

at the PRESETS section of DSP menu will also be reected in the

OUTPUT SETUP section of INPUT/OUTPUT menu and vice-versa.

Loading ...

Owner's Manual - Page 10