Loading ...
Loading ...
Loading ...
ge.com(U.S.)
www.GEAppliances.ca(Canada)
Ovenrack Oven Racks
M1 oven i'acLs Inay be cleaned by hand
with an abrasive cleaner or steel wool.
Mter cleaning, rinse tile racks with clean
water and d_' with a clean cloth. Gray
porcelain-coated oven racks iilav i'elilain
in the oven dtwing the seltkleaning cycle
without being damaged. Tile shiny, silve>
colored oven racks may remain in tile
oven dtwing the self-cleaning cycle, but
they will lose their luster and become
hard to slide,
It Mll be necessax T to grease all oven
rack side edges with a light coating of
vegetable oil alter cleaning them by hand
or in tile oven, This will help maint;fin
the ease of sliding the rocks in and
()tit (It tile oven.
Socket
]]ass cover
Oven Light Bulbs
NOTE"The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION.Beforereplacing your
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circu# breaker panel
Be S/lI'e to let the light cover and bulb
cool completely.
For yore" safi_t} ', do not touch a hot bulb
with bare hands or a damp cloth.
Toremove:
[] Turn tile glass coxer
co/mterclockwise l/4 mrn/mtil tile
tabs ot tile glass cover clear tile
grooves of tile socket.
[] Using gloxes or a dry cloth, remoxe
tile bulb b} pulling it straight out.
To replace:
[] Use a new 130-volt halogen bulb,
not to exceed 50 watts.
[] Using gloxes or a dry cloth remoxe
tile bulb from its packaging. Do not
touch the bulb with bare finge_s.
Receptacle
[] Push tile bulb straight into tile
receptacle all the way:
[] Place the tabs of the glass coxer into
tile grooxes of tile socket. Tm'n tile
glass cover clockwise 1/4 mm to
engage.
For improved lighting inside
the oven, clean the glass cover
fl'equenfly using a wet cloth. This
should be done when the oven is
completely cool.
[] P,econnect electrical power to
tile oxen.
35
Loading ...
Loading ...
Loading ...