Loading ...
Loading ...
Loading ...
2. Push and hold the lock button on the spray wand.
3. Install the detergent tank onto the spray wand.
NOTE
Do not let detergent dry on the surface to prevent streaks.
10.5 START THE MACHINE
Figure 9.
CAUTION
Do not operate without the water supply connected.
CAUTION
Before you start the machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water comes out from the gun,
release the gun trigger.
1. Connect the machine to the power supply.
2. Set the power switch to the “ON” ( | ) position.
3. Turn the water supply on.
4. Pull the gun trigger.
10.6 STOP THE MACHINE
1. Release the gun trigger.
2. Set the power switch to the "OFF" (O) position.
WARNING
If you do not use the machine：
• Stop the machine.
• Turn the water supply off.
• Disconnect the power cord from the outlet.
• Pull the gun trigger to release the remaining pressure
from the machine.
• Lock the trigger safety button.
11 MAINTENANCE
WARNING
Before maintenance, make sure that you
• stop the machine.
• wait until all the moving parts stop.
• disconnect the plug from the power source.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
WARNING
Replace the power cord by an approved service center.
11.1 NOZZLE MAINTENANCE
Figure 7.
If there is too much pump pressure, the nozzle can become
clogged, you can feel a pulsing sensation while you pull the
gun trigger.
11.1.1 REMOVE THE NOZZLE
1. Push and hold the lock button on the spray wand.
2. Remove the nozzle from the spary wand.
11.1.2 CLEAN THE NOZZLE
1. Use a straight paper clip or cleaning tool to clean the
spray tip.
2. Flush and clean the unwanted materials out of the nozzle
with the garden hose.
3. Install the clean nozzle to the spray wand.
12 TRANSPORTATION AND
STORAGE
WARNING
Disconnect the power cord before transportation and
storage.
12.1 MOVE THE MACHINE
• Point the spray wand in a safe direction.
• Only hold the machine with the handgrip.
12.2 STORE THE MACHINE
WARNING
Make sure that the gun, the high pressure hose and the
pump are dry.
WARNING
Make sure that children cannot come near the machine.
NOTE
Use a recommended pump protector to prevent cold
weather damage during storage in winter.
• Disconnect the garden hose from machine.
• Wind the high pressure hose.
6
English
EN
Loading ...
Loading ...
Loading ...