Loading ...
Loading ...
Loading ...
PROBLEM POSSIBLE
CAUSE
SOLUTION
The motor buzzes,
but you can not
start the machine.
The supply volt-
age is low.
Make sure that on-
ly the pressure
washer operates
on the circuit.
The system has re-
maining pressure.
1. Stop the ma-
chine.
2. Pull the gun
trigger on
spray wand to
release pres-
sure
3. Start the ma-
chine.
The voltage de-
creases across ex-
tension cord.
Disconnect the ex-
tension cord, and
connect the ma-
chine directly into
the outlet.
You do not use the
machine for a long
time.
Speak to a person
of an approved
service center.
There is remaining
friction in compo-
nents. You can
hear a hum.
1. Disconnect the
water supply.
2. Turn the ma-
chine on for 2
or 3 seconds.
3. Repeat the
above step for
several times.
There is no water. The water supply
is off.
Turn the water
supply on.
The garden hose is
blocked.
Make sure that the
garden hose is free
from blockage.
14 TECHNICAL DATA
Model No. G40
Rated Voltage 220-240V ~ 50Hz
Rated Pressure 10 MPa
Permissible Pres-
sure
13.5 MPa
Power Rating 1900 W
Rated Water Flow 6.5 l/min
Maximum Water
Flow
7 l/min
Maximum Water In-
let Pressure
0.7 MPa
Maximum Water In-
let Temperature
40 °C
Measured sound
pressure level
L
pA
= 82 dB(A),
K
pA
= 3 dB(A)
Measured sound
power level
L
wA
= 90.1 dB(A)
Guaranteed sound
power level
L
wA.d
= 94 dB(A)
Vibration < 2.5 m/s
2
, K =
Protection Degree IPX 5
Double-insulated construction.
15 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks website https://www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner’s manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
16 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Peter Söderström
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category: Pressure washer
Model: G40（PWA111）
Serial number: See product rating label
8
English
EN
1.5 m/s
2
Loading ...
Loading ...