Loading ...
Loading ...
Loading ...
21
INSTALLATION
BEFORE INSTALLING THE APPLIANCE
- Turn off gas supply to replace or rebox.
- Clean replace oor and chimney before installing log set. Seal any ash. Clean out doors to protect
the unit from down drafts.
MOUNTING ASSEMBLY PROCEDURE
- Place grate/burner assembly into rebox with the front pan facing forward.
- Drill two (2) 5/32" diameter holes approximately 1" deep.
- Anchor the front pan to the oor using the (2) Concrete Attachment Screws (Not Included).
(See Fig. 18).
- Proper installation of the grate is essential to prevent any movement of the gas logs and
controls during operation.
LAVA ROCK INSTALLATION
Place the Lava Rock around the burner assembly. DO NOT place inside of heater
or on logs. Place desired amount of lava rock on the replace oor only.
1/2 x 3/4 Hex Head
Concrete Screw
Mark location using log set
base as template and drill a
hole in floor of fireplace 1”
deep to accept concrete
screw (both sides).
Fig. 18
Loading ...
Loading ...
Loading ...