Loading ...
Loading ...
Loading ...
07
7-111
When Smart Cruise Control is
temporarily canceled while Highway
Driving Assist is operating, Highway
Driving Assist will be in the standby state.
At this time, Lane Following Assist will
operate normally.
Information
• Driving Speed Limit helps you drive
below 40 mph (60 km/h). At this time,
the vehicle decelerates due to the
vehicle ahead. After the vehicle has
decelerated, it cannot automatically
accelerate.
• Driving Speed Limit will cancel in the
following circumstances:
- When the driver grabs the steering
wheel again
- When the driver turns on Lane
Following Assist by pressing the
button
- When Smart Cruise Control (+, -,
) switch or button is pushed,
or the accelerator pedal or the brake
pedal is depressed
Highway Lane Change Assist (if
equipped)
Display and control
You can see the status of the Highway
Lane Change Assist function operation
in the Driving Assist view on the cluster.
Refer to “View Modes” section in chapter
4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.
Ready/OperatingReady/Operating Standby/CanceledStandby/Canceled
OJX1071104NOJX1071104N OJX1071103N OJX1071103N
(1) Highway Lane Change Assist
indicator
• Green
on : Ready state
• Green
blink : Operating state
• Gray
on : Standby state
• White
blink : Canceled state
(dispaly only a certain time)
(2) Green lane line
The green lane line is displayed when
the function starts operating, and until
the vehicle steps on the lane line.
(3) Green arrow
The green arrow is displayed when a
certain amount of time has passed
after the function has started
operating, and until the lane change
has completed.
(4) Message
• Message is displayed when the
function does not operate even
though the turn signal switch is
used.
• Message is displayed when
the function is canceled while
operating.
Loading ...
Loading ...
Loading ...