Loading ...
Loading ...
Loading ...
7 Maintenance
24
7 Maintenance
Basic information about maintenance:
U
Press the Rotary Switch to open the Cockpit� This area consists
of a ‘Maintenance status’ c section and a ‘Machine setting’ f
section� You can manage the maintenance of your Z10 in
the c section�
U
If a maintenance programme needs to be initiated, the
c symbol appears with a red background� Press the Rotary
Switch to open the Cockpit� The Cockpit shows maintenance
programmes that need to be carried out in the form of
messages with red backgrounds� Press the button that
corresponds to the message to go straight to the maintenance
programme� Maintenance programmes that are due
imminently are indicated on your Z10 by means of a bar
display within the message�
U
Carry out each maintenance programme when you are
prompted to do so�
You can start coffee system rinsing manually at any time�
Precondition:The start screen is displayed�
T
Place a receptacle under the dual spout�
T
Press the Rotary Switch�
T
Touch c�
T
Touch ‘Rinse’ to start the rinse operation�
The operation stops automatically�
8 minutes after milk preparation, the milk system is automatically
rinsed� Therefore always place a receptacle under the dual spout
after preparing milk�
To ensure that the milk system in the dual spout always works
properly, you must clean it daily when you have been preparing
milk�
If the wrong cleaning agent is used, the machine could be
damaged and/or traces could be left behind in the water�
T
Use only original JURA maintenance products�
Rinsing the machine
Automatic milk system
rinsing
Cleaning the milk system
CAUTION
Loading ...
Loading ...
Loading ...