Loading ...
Loading ...
Loading ...
Care and Cleaning
kdvar_tium Over_
Charcoal filter
qXSlA) The charcoal filter cannot be cleaned.
It must bereplaced. O,zler Pa,_ No.
WBO2X9883 from your GE supplier.
If the model is not vented to the
outside, the air will be recirculated
through a disposable charcoal filter
that helps remove smoke and odors.
The charcoal filter should be
replaced when it is noticeably dirty
or discolored (usually after 6 to 12
months, depending on usage).
To remove the
charcoal filter
To remove the charcoal filter,first
disconnect power at the main fuse.
Remove the top grille by removing
the 2 screws that hold it in place.
You may need to open the cabinet doors to
"remove the screws.
Slide the filter towards the front of
the oven and remove it. Remove 2,_rille screws to
removb_tke grille.
To install the
charcoal filter
To install a new filter, remove plastic
and other outer wrapping from the
new filter.
Insert the filter into the top opening
of the oven as shown.
It will rest at an angle on 2 side
support tabs and in front of the
right rear tab. Replace the grille
and 2 screws. Reconnect power at
the main fuse.
Optional kits Available at extra cost from your GE supplier.
Filler Panel Kits Filter Kits
•JX4OAL-Almond
• JX4OCT-Bisque
• JX4OWH-Wkite
• fX41-Black
When replacing a 36" range hood,
filler panel kits fill in the additional
width to provide a custom built-in
appearance.
For installation between cabinets
only; not fi)r end-of cabinet
installation. Each kit contains two
3" wide filler panels.
• JXS1A-Recirodating CkarcoalFilter Kit
Filter kits are used when the oven
cannot be vented to the outside.
Decorative Panel Kit
• JX22SS-Stainless Steel
When replacing a Hi/Low range, the
decorative panel kit fills in the area
between the oven and the range left
by the Hi/Low model.
4O
Loading ...
Loading ...
Loading ...