Loading ...
Loading ...
Loading ...
ENGLISH | 7
MOP HEAD
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Mop Head with main unit as shown (Figure 2).
2. Slide Mop Head neck into Steam Nozzle, pressing rmly until release button snaps
throughhole.
3. To remove Mop Head, press rmly on release button while simultaneously pulling Mop Head
away from Steam Nozzle.
MICROFIBER PADS
1. Lay one Microber Pad on at surface, with two fastener
strips facing upward.
2. Align Mop Head above Microber Pad. Make sure Mop
Head is oriented with Pad as shown, and centered as best
as possible (Figure 3).
3. Press Mop Head rmly down onto Microber Pad.
Fastener strips will adhere to pad grips on underside
of Mop Head. Pad should now be attached and ready
foruse.
CAUTION: Use care when handling a recently used
Microber Pad, as it may still be hot.
NOTE: Microber Pads are machine washable. To
avoid picking up lint, washing separately from other
fabrics is recommended. Only use liquid detergent.
Avoid using any fabric softeners or bleach. Air drying
is recommended; machine drying on a low setting is
acceptable as well.
HOLE
FIGURE 3
RELEASE
BUTTON
FIGURE 2
±
±
±
MOP HEAD NECK
STEAM NOZZLE
Loading ...
Loading ...
Loading ...