Loading ...
Loading ...
Loading ...
Notes:
• The smallest supported Universal size is 76.2 x 127 mm (3 x 5 in.) and loaded only in the multipurpose feeder.
• The largest supported Universal size is 215.9 x 1219.2 mm (8.5 x 48 in.) and loaded only in the multipurpose
feeder.
1 From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select the unit of measure >
2 Touch Portrait Width or Portrait Height.
3 Select the width or height, and then touch .
Loading the standard or an optional 550‑sheet tray
The printer has one standard 550‑sheet tray (Tray 1) and may have up to four optional 550‑sheet trays including the
special media tray. For narrow paper sizes such as A6 and envelopes, use the special media tray. For more information,
see
“Loading the optional 550‑sheet special media tray” on page 82.
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray
separately. Keep all other trays closed until needed.
1 Pull the tray completely out.
Notes:
• Do not remove trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
• The standard 550‑sheet tray (Tray 1) does not automatically detect the paper size.
Using C748x 79
Loading ...
Loading ...
Loading ...