Loading ...
Loading ...
Loading ...
4 Push the card firmly into place.
Warning—Potential Damage: Be careful not to damage the connectors.
Note: The entire length of the connector on the card must touch and be flush against the system board.
5 Reattach the system board cover.
Note: When the printer software and any options are installed, it may be necessary to manually add the options
in the printer driver to make them available for print jobs. For more information, see
“Adding available options
in the print driver” on page 27.
Installing an Internal Solutions Port
The system board supports one optional Lexmark Internal Solutions Port (ISP).
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Additional printer setup 15
Loading ...
Loading ...
Loading ...