Loading ...
Loading ...
Loading ...
Note: This task requires a flathead screwdriver.
1 Remove the system board cover.
a Turn the screws on the cover counterclockwise to loosen them, but do not remove them. Pull the standard tray
to access the two bottom screws.
b Slide the cover slightly up until each screw is in the keyhole.
c Pull the cover to remove it.
2 Locate the appropriate connector on the system board.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or connectors.
Additional printer setup 10
Loading ...
Loading ...
Loading ...