Loading ...
Loading ...
Loading ...
9
Rev.13052022
INSTALLING YOUR APPLIANCE INTO THE CABINETRY
PLACING THE REFRIGERATOR INTO THE CABINET
With the help of another individual, manoeuvre the appliance into the cabinet. Pull the power cord through a pre drilled hole at
the back of the cabinet or a the power point is inside the cabinet, plug in the refrigerator before installing it into the cabinet.
Ensure you do not kink or bend the power cord as damaging the cord could be a safety and re risk.
For safety reasons, only turn the main power on the appliance once the installation process is complete.
Lift and slide the appliance into the cabinet then adjust its position making sure that the top adjustment plate is meeting the
top of the cupboard. Ensure that the appliance is centred in the cabinet cavity checking the side panel and the door gasket is
attached to the front end of the cupboard sides.
Check that the lips of the spacers are lined up with the top lip of the cabinet.
There are two metal plates at the base of the appliance. Fit the supplied spacers as illustrated. Ensure that the step in from the
cabinet base edge to the appliance is the same on both sides.
Using a level, check that the appliance is aligned correctly and using a spanner, adjust the levelling feet as required.
Fix the appliance to the cabinet by screwing through the 2 screw holes in the top plate lip
Fasten the side surfaces of the hinge with screws. Fix one screw to the top hinge and one screw to the bottom
hinge. Then x all other screws to the remaining hinges.
Fasten the hinge side with screws putting one at the top hinge and one at the bottom hinge, check the alignment and then
fasten the remaining screws. Remove the 2 plastic spacers at the bottom and x the appliance to the cabinet base, and re-apply
the spacers (these are also used as covers for the bottom bracket).
Freezer base
Cabinet base
Floor
Freezer base
Cabinet base
Floor
Trim
T
T
1
2
3 4
5
Loading ...
Loading ...
Loading ...