Loading ...
Loading ...
Loading ...
REMOVABL OVEN RACKS
Be carefu! not to scratch the oven finish when
installing or removing oven racks,
To install:
1. Set the raised back edgeofthe rack on apair of rack
guides.
2. Push the rack in until you reach the bump in the rack
guide, then lift the front of the rack and push the rack
all the way in.
To remove:
1. Pull the oven rack out, then up.
Some models have one standard oven rack and one
folding oven rack.
The folding rack can be easity stored away when not in
use.
NOTE:
BUMP tN
RACK GUIDE
NOTE: "_"
The racks are designed with stop necks, When
the racks are pBaced cerrecUy on the rack sup-
po_L and extended from the oven, the stop lock
prevents the racks from tilting when you are
removing food from the racks or pRacing food on
them,
For best pe_ormance remove oven racks during a clean cycle. If oven racks are left in the range during
a self-cleaning cycle, they win darken, lose their luster and become hard to s!ide.
tf you choose to leave the racks in the oven, you can polish the edges of the racks with steel wool and
apply a smal! amount of vegetable oil to the rack edges after the self-clean cycle.
REMOVABLE OVEN DOOR
TO Ye_ove:
1. Open the door to the stop position (see illustration)°
2. Grasp the door at each side and lift up and off the
hinges.
NOTE: When the door is removed and hinge arms
are at stop position, do not bump or try to move
the hinge arms. The hinges couJd snap back
causing an injuw to the hands or damage to the
porcelain on tthe front of the range, Cover the
hinges with toweling or empty towel rolls while
working in the oven area,
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The hinge arms must st!l! be in the stop
position.
2, Slide the door down onto the hinges as far as it will
go and close the door.
STOP (BROIL) POSITION
HINGE
RI MOVABLE STORAGE E)RAWe:R
This drawer gives you space _or keeping
cookwareand bakeware, Plastics and flammable
material shougd not be kept in this drawer,
Do not overload the storage drawer. Ifthe drawer is too
heavy, itmay slip off the track when opened. To open the
drawer, grasp the center of the handle and pull straight
out.
To remove: Pull drawer straight out and lift over the
guide stops,
To replace: Lift over the guide stops and slide drawer
into place.
19
,IF// stop
NEMNT38-1
Loading ...
Loading ...
Loading ...