Loading ...
Loading ...
Loading ...
18
Drying Inside Operation
The inside of the unit can be dried to suppress mildew growth on the cooler.
The DRYING INSIDE operation is recommended after each use of the unit (approx. 1 hour).
When continuous operation is being performed by continuous drainage (setting hose), there is no need to perform the
DRYING INSIDE operation every day. However it is recommend that DRYING INSIDE operation is used after every two weeks.
To abort DRYING
INSIDE operation
Press while the unit is performing the
DRYING INSIDE operation (the DRYING INSIDE
lamp turns off).
Press
to abort the DRYING INSIDE
operation and resume the regular operation.
Blip
Blip
Automatic Operation
To activate DRYING INSIDE operation after each
use
Blip
Press while the
POWER is ON
DRYING INSIDE operation standby
(DRYING INSIDE lamp lights.)
DRYING INSIDE operation starts when
dehumidifying ends.
DRYING INSIDE operation starts.
The DRYING INSIDE lamp flashes, the
humidity indicator turns off, and the louvre
stops in the vertical position.
DRYING INSIDE Operation
DRYING INSIDE operation ends.
The DRYING INSIDE lamp turns off and the
louvre closes.
<To deactivate the automatic
operation>
Press
when the POWER is ON.
(The DRYING INSIDE lamp turns off.)
Blip
Manual Operation
The DRYING INSIDE operation can only start
when the POWER is OFF.
Blip
Press while the
POWER is OFF
DRYING INSIDE operation starts.
The DRYING INSIDE lamp flashes, the humidity
indicator turns off, and the louvre stops in the
vertical position.
DRYING INSIDE Operation
DRYING INSIDE operation ends.
The DRYING INSIDE lamp turns off and the
louvre closes.
Information
Disconnecting the power plug will stop the automatic operation.
This function does not remove existing mildew. Also, aborting the DRYING INSIDE operation may cause the benefits to
diminish.
During DRYING INSIDE operation, do not close the louvre. It will cause noise.
The moisture expelled from inside the unit may cause the room humidity level to rise.
The air emitting from the unit may appear white depending on the humidity or temperature of the room.
The moisture expelled from inside the unit may have a smell due to odorants, which have not been caught by the filter and
dissolve in water.
During DRYING INSIDE operation, the OFF TIMER cannot be set.
If operation is stopped while the FULL lamp is lit, the DRYING INSIDE operation cannot be set unless the power is turned
off.
Loading ...
Loading ...
Loading ...