Loading ...
Loading ...
Loading ...
17
Operating
Setting OFF TIMER
1
Switch the power ON.
Select operation mode.
P10–14
Select the louvre swing direction.
P16
2
Blip
Press
Set the operation
time.
Press once to display “
” “ ”.
Each press will change the display in
the sequence of 1 to 12 hours.
(Holding the switch will cause the display to
change continuously.)
......
Blip
Blip
Blip Blip
No display
→The OFF TIMER is set.
The remaining time will decrease one
hour after each hour elapses.
When the set time is reached, the unit stops
automatically and the louvre closes automatically.
DRYING INSIDE (auto) operation will start if it
has been activated.
P18
Cancellation
<When you want to stop operation>
Press POWER switch g OFF
<When you want to disable the OFF
TIMER mode and continue operation>
Press and hold the ON/OFF TIMER switch until
the remaining time disappears from the display.
Setting ON TIMER
1
Switch the power OFF.
2
Set the time you
wish the unit to
turn ON.
Press once, the operation mode
indicator and “
” on the digital display
ash, and “
” is displayed.
Each press will change the display in
the sequence of 1 to 12 hours.
(Holding the switch will cause the display to
change continuously)
......
Blip Blip
Blip Blip
No display
Select operation mode.
P10–14
Set the DRYING INSIDE (auto) operation as
desired.
P18
Select the louvre swing direction.
P16
3
Conrm the time
setting by
pressing the
POWER switch.
The timer display lights.
g
The ON TIMER is set.
If both the timer display and operation mode indicator
blink, it means the POWER switch is not pressed.
(Analarm“blipblip”soundsfor1minute.)
The remaining time will decrease one
hour after each hour elapses.
When the set time is reached, the
unit automatically starts.
Cancellation
Press POWER switch g OFF
Information
When the ON TIMER is set during the DRYING
INSIDE operation, the operation is stopped.
The ON TIMER function is not operable using a
commercially-available timer plug.
Blip
Press
Blip
Press
OFF TIMER operation
The OFF TIMER can be set between 1 to 12 hours. Set
the timer when the power is switched on.
1
2
Using Timer
Information
Empty the water tank before operating. During operation, if the
tank becomes full, the FULL lamp lights and the unit stops.
The OFF TIMER and ON TIMER cannot be set at the same time.
If the OFF TIMER mode is used with the INTELLIGENT LAUNDRY
or MILDEW GUARD, the unit may stop before the laundry or the
bathroom is dry.
The OFF TIMER cannot be set during DRYING INSIDE operation.
1
.
32
ON TIMER operation
The ON TIMER can be set between 1 to 12 hours.
Set the timer when the POWER is off.
Loading ...
Loading ...
Loading ...