Loading ...
Loading ...
Loading ...
12
1
Press to begin operation.
2
Select the operation mode.
To select the dehumidifying mode and operate
Press
P13–14
To set the humidity and operate
Press
P13
3
Press and select the swing direction.
P16
<To stop operation>
Press
Dehumidifying
23 21
Blip
Blip
POWER lamp lights.
The operation mode is displayed.
Inverter indicator lights.
Louvre opens, and blows air.
The operation mode switches each time the button is pressed.
Blip Blip Blip Blip
Blip Blip
The set humidity changes each time the button is pressed.
657050％5560
Blip Blip Blip Blip
Blip Blip
POWER lamp goes out.
The operation mode indicator goes out.
Inverter indicator goes out.
Information
The dehumidifier remembers the operation mode. Even if the power plug is disconnected or the power is turned off, the
unit restarts at the previous setting.
Thehumiditycannotbesetinmodesotherthan“ECOAUTO”.
Operation stops when the tank is full. To restart operation, remove water from the tank. If a continuous drainage hose is set,
the dehumidifier will operate continuously.
P20
In the case of a power outage during operation, the dehumidifier will restart operation upon restoration in the operation
mode before the power outage.
If the DRYING INSIDE (auto) operation has been activated, the DRYING INSIDE operation will start after the unit stops.
P18
The operation mode can be selected accordingly to the situation.
When drying your shoes, put them in a position slightly higher from the floor so that the air from the dehumidifier is directed to
them.
Note
Loading ...
Loading ...
Loading ...