Loading ...
Loading ...
Loading ...
Care and Cleaning Keep your refrigerator and freezer clean to prevent odor build-up. Wipe any spills
immediately, and clean both sections at least twice a year. Never use metallic
scouring pads, brushes, abrasivecleaners, orstrong alkalinesolutions on anysurface.
Do not wash any removable parts in a dishwasher.
Always unplug the power cord from the wall outlet before cleaning. NOTE:
Turning the control to OFFdoes not disconnect power to the controls, light bulb, or
other electrical components.
_!_"d___,lbd[el Damp objects stick to
cold metal surfaces. Do not touch
refrigerated surfaces with wet or damp
hands.
Inside
Wash insiderefrigerator and freezer surfaces with asolution of 2 tablespoons baking
soda in 1 quart warm water. Rinseand drythoroughly. Besure to wringexcess water
out of sponge or cloth before cleaning around thecontrols, light bulb, or anyelectrical
parts.
Wash removable partssuch asshelvesand drawers with baking sodasolution, or mild
detergent and warm water. Do Not Use Harsh Cleaners On These Surfaces. Rinse
and drythoroughly. Clean the door gasketswith mild suds,rinsewith clear water and
wipe dry. Do not use razor blades or other sharp instruments that can scratch the
appliance surface when removing adhesive labels. Any glue left from the tape or
energy label can be removed with a mixture of warm water and mild detergent, or
touch the glue with the sticky side of tape already removed. Do Not Remove The
Serial Plate.
To avoid damage and
help the refrigerator run as efficiently as
possible, clean the condenser and air
vents periodically.
Vents
Air Vents on Lower Access Panel
Light Shield
\
/
/Remove
Removing Crisper Light Shield and Bulb (some models)
Outside
Clean stainless steel front and handles with hot soapy water and a dishcloth. Rinse
with clean water and a soft cloth. Wipe stubborn spots with an ammonia-soaked
paper towel, and rinse. Cleaners made especially for stainless steel, such as Sheila
Shine, trademark of Sheila Shine, Inc., Stainless Steel Magic, trademark of Magic
American Corp., or similar products are suggested. Always follow manufacturer's
instructions. Wash the rest ofthe cabinet with warm water and mild liquid detergent.
Rinse well, and wipe dry with a clean soft cloth.
Toe Grille:
Remove any dust or dirt from the front of toe grille using a vacuum cleaner with its
dusting tool attachment. Removetoe grille by pulling it straight out. While grille is
removed, vacuum the back of grille, and wipe with a sudsy cloth or sponge.
Periodically clean the condenser (black tubes and wires beneath refrigerator, behind
toe grille). Do not allow lint or dust to accumulate on the coils. Insert a long handled
brush or vacuum attachment between the two coils to bring the lint forward. To
replace toe grille, line up tabs with holes, and push grille straight on.
Usecaution when cleaning in the area of the coils. Surfaces there
may be sharp.
Lower AccessPanel:
Asshown below left, air vents on lower accesspanel atthe rear of refrigerator should
be cleaned periodically. Clean vents by using a vacuum cleaner with its dusting tool
attachment. When moving the refrigerator, pull straight out. Do not shift
refrigerator from side to side. This may tear or gouge the floor covering. Becareful
not to move refrigerator beyond plumbing connections.
Replacing the Light Bulb
To replace the light bulb in either compartment:
1. Unplug refrigerator.
2. Wear gloves as protection against possible broken glass.
3. Replace old bulb with an appliance bulb of the same wattage.
4. Remember to plug refrigerator back in.
11
Loading ...
Loading ...
Loading ...