Loading ...
Loading ...
Loading ...
19
Use a gas mixture consisting of 75% nitrogen (N
2
) and 25% carbon dioxide (CO
2
).
Gas Regulator Installation
Proper installation of your gas
regulator and a thorough
understanding of gas canisters are
essential to the safe use of this
product. Review and follow
instructions for handling gas cylinders
and this section to ensure your safety
and the safety of others.
NEVER CONNECT A GAS
CANISTER DIRECTLY TO THE
UNIT
! To avoid a potential explosion
that could result in grave injury or
even death, ALWAYS CONNECT THE
CANISTER TO THE GAS REGULATOR.
IMPORTANT! The gas canister is shipped to you EMPTY for safety reasons. You will need to get this
canister filled before you can use your unit. In most areas, you can get canisters filled at:
stores that sell kegs
party stores or convenience stores
fire and welding supply stores.
DO NOT ATTEMPT TO REFILL GAS CANISTERS YOURSELF!
DANGER! Any pressurized gas is potentially dangerous. Canisters or cylinders are under
pressure and proper handling is essential to safety. ALWAYS HANDLE WITH CARE!
To install the NO2 canister:
1. I Insert the end of the gas line with the green coupler onto the
bottom end of the regulator. (See Figure D and Photo 1). Secure
the line to the regulator by tightening the green coupler. Secure
the gas line by tightening the green coupler.
2. Next, insert the black rubber washer into the attachment nut into
the regulator and connect the regulator to the gas canister
valve. Tighten with an adjustable wrench (not provided). DO
NOT OVERTIGHTEN. (As shown in figure E)
3. Attach the NO2 gas line to the regulator outlet nipple and
secure it with a clamp.
4. Secure the canister with the rubber restraining strap (on the side
of the wine keg dispenser cabinet) as shown in Figure D. Be
sure to situate the canister so that the gauges are easily
readable and shut-off valves are easily accessible.
SPECIAL PRECAUTIONS: Ensure that the safety devices for your pressurized system are installed and remain
installed. Once installed, NEVER remove the rubber washers in the regulator attachment nut to the canister or in
the tap mechanism. NEVER bypass these safety features.
Connect to
Gas Cylinder
25% CO
2
Gas
Cylinder
Gas Line
75% N
2
Gas Regulator
Loading ...
Loading ...
Loading ...