Loading ...
Loading ...
Loading ...
10
Reversing the Door Swing
Select models in the SBC58/SBC7BRS/SBC56G series have user-reversible doors. Holes on the
opposite side have already been prepared at the factory.
By default, the door hinge is on the right side. If you prefer it on the left, please follow the appropriate
instructions:
For SBC58/SBC7BRS models:
1. Take off the upper hinge cover from the door and remove the screws that hold the top hinge.
2. Lift the hinge straight up to free the hinge pin from the socket at the top of the door.
3. Lift the door up and away to free its bottom socket from the hinge pin.
4. Remove the screws to the bottom hinge.
5. Remove the decorative caps from the opposite side and plug the holes from the original side with
the decorative caps.
6. Move the bottom hinge to the opposite side and tighten the screws. Use any lock washers or nuts if
they were installed in the original installation.
7. Replace the door with the hinge pin on the bottom hinge. Place the top hinge pin into the door.
Insert screws into the top hinge and tighten.
If you notice the door is not hanging straight, loosen the top hinge screws, adjust the door until it is
leveled, and tighten the screws.
Loading ...
Loading ...
Loading ...