Loading ...
Loading ...
Loading ...
4.31 REMOVING AND INSERTING THE HOOK-IN RACKS
You can remove the hook-in racks in order to clean them separately.The hook-in racks
are all fixed to the walls of the cooking compartment at four points.
4.32 REMOVING THE HOOK-IN RACKS
To remove the hook-in racks, proceed as follows:
Undo the screw on the bottom the hook-in rack. The lower
hooks of the hook-in rack are released.
Take hold of the top of the hook-in rack and screw on the
screw on the bottom the hook-in rack again.
4.33 REPLACING THE OVEN LIGHT BULB
If the oven light bulb fails, it must be replaced. Replacement heat-resistant bulbs can
be obtained from the after-sales service or from specialist retailers. Please specify the
SN number of your appliance. Do not use any other type of bulb.
Proceed as follows:
Switch off the relevant circuit breaker.
Open the appliance door.
Lay a tea towel in the cooking compartment if it is cold to
prevent damage.
Unscrew the glass cover from the bulb inside the
cooking
compartment by turning it anti-clockwise.
Replace the bulb with one of the
same type. Voltage: 230 V Power: 25 W Thread:
G9 Temperature resistance: 300°C
P a g e |
30
ONLINE: TRINITYAPPLIANCES.COM.AU
Loading ...
Loading ...
Loading ...