Loading ...
Loading ...
Loading ...
3.9 GAS CONNECTION
The appliance must be connected in accordance with the currently applicable
regulations. Before installing the appliance, check that the local conditions (type of
gas and pressure) are compatible with the appliance settings. The permissible
appliance settings can be found on the rating plate.Connection to the gas lines and
seal fitting must be carried out professionally according to the currently applicable
standards.
3.10 GAS CONNECTION ON THE APPLIANCE
The gas connection is located at the rear left of the appliance. Connecting pieces
NG corrugated tube
union(and seal)
An inlet manifold extension pipe must be fitted to the appliance. Ensure that the pipe
is connected using the washer provided and that the bracket is screwed to the
appliance as shown in the diagram below.
Fit the supplied pressure regulator (for Natural gas) using the NG test point adaptor
and washer to the inlet manifold. Ensure the arrow is pointing towards the appliance
and that pressure testpoint is accessible from the final position.
Push the cooker back and install the anti-tilt bracket.
Connect the appliance to the consumer piping outlet using only fixed piping.
This final connection is made when the product is pushed back into position by access
under the cooker.
P a g e |
14
ONLINE: TRINITYAPPLIANCES.COM.AU
Loading ...
Loading ...
Loading ...