Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/29328389-mda200/bga.png)
10
IR Codes Settings:
-
mal” IR codes will receive the signal. To prevent
controlling multiple devices with the remote
to prevent signals from the remote control being
would control the MDA200.
Front IR Sensor Settings:
You can enable or disable the functionality of the
IR sensor to change whether or not the MDA200
will accept commands from the remote control.
You may want to do this if you have an external
IR sensor that operates the MDA200 with other
devices.
Power IR, Input IR, and Trim IR Settings:
The MDA200 can be controlled by another Mc-
Intosh unit’s remote control using the data in port.
If you want to limit what commands sent by the
Power IR and Input IR settings.
To disable power commands coming from the
data port or from a connected external IR sensor
Trim Functions Menu
Entering Trim Functions Menu
A brief deliberate press (not hold) and release of
-
tions menu.
Trim Functions Menu Options
Settings Options
Input Trim
4 Levels
Adjusting Trim Functions:
The following is a list of descriptions of the
various options in the trim functions menu. The
Note: The balance and input trim settings in this menu will
only be adjusted and affect the currently selected input
and their configurations will be independently saved.
• Adjusting Audio Balance: If you want one
• Adjusting Input Trim Levels: Devices connected
to the various inputs may be sending audio at
varying volumes to the MDA200. This could
volume of an input as it enters the MDA200 by
• Adjusting Brightness: The front information
levels from dim to bright.
Setup Menu Settings (continued)
If you wish to disable input commands coming from
the data port or from a connected external IR sensor
If you wish to disable trim commands coming from
the data port or from a connected external IR sensor
Power Saving Settings:
Enabled: The MDA200 automatically enters
not playing sound or changing settings.
Disabled:-
Factory Reset:
all settings to factory defaults. All previous setup
changes will be lost.
FACTORY RESET
display says “In Progress!” and immediately release.
defaults.
Loading ...
Loading ...
Loading ...