Waldorf FF8130E 800 Series Filtamax Fryer Filter

Installation Operation Manual - Page 9

For FF8130E.

PDF File Manual, 22 pages, Read Online | Download pdf file

FF8130E photo
Loading ...
Loading ...
Loading ...
-9-
It is most important that the filter is checked and that the unit is operating correctly before handing over
to the user.
Before Checking Operation
Unpack and check unit for damage and report any damage to the carrier and supplier. Report any
deficiencies to your supplier.
Check that the unit has been supplied with the following:
1 x Filter Bag
1 x Filter Bag Frame
1 x Return Delivery Tube
Electrical supply
Check that the available power supply is suitable. The filter rating plate is located on the side panel
below the return delivery tube swivel fitting.
110-120V, 60Hz, 1P+N+E, 6.4 Amp
220-240V, 50Hz, 1P+N+E, 3.2 Amp.
The Filter unit is a mobile appliance and is provided with a 2.5 metre cord set for plugging into a
matching electrical socket of the required electrical supply when in use.
When not in use the cord set is stored around the cord-stowage frame on the filter unit’s handle.
Important: If an electrical socket is not located in range of the filter cord set when the filter is in position,
an extension cord will be necessary. Only use an extension cord with suitable residual current device
(R.C.D) circuit breaker. Ensure the R.C.D is connected between the power supply and the
extension cord.
Installation / Storage
FF8130E The FF8130E Fryer Filter is designed for use with Waldorf FN8120G/GE and FN8226G/GE
gas fryers. The filter is easily stored under these fryers, it can however be stored anywhere
provided it is not obstructing normal kitchen traffic and obstructing use of other equipment.
FF8135E The FF8135E Fryer Filter is designed for use with Sterlec FN8123E/EE, FN8223E,
FN8127E/EE, FN8224E/EE, FN3050ECS and FN3052ECS electric fryers. As it cannot be
stored under the fryers, it can be stored anywhere provided it is not obstructing normal
kitchen traffic and obstructing use of other equipment.
FF8140E The FF8140E Fryer Filter is designed for use with Waldorf FN8130GHPO, FN8130G/GE
gas fryers. The filter is easily stored under these fryers, it can however be stored anywhere
provided it is not obstructing normal kitchen traffic and obstructing use of other equipment.
Never store the fryer filter in a location where it may be subject to damage or foreign matter
being dropped into the filter tank or filter bag.
INSTALLATION
Loading ...
Loading ...
Loading ...