Loading ...
Loading ...
Loading ...
48
Premium Diagnostic & TPMS Scanner I70TSII User's Manual V1.0
Figure 9-29 Sample ECU Information save Screen
9.2.5 Active Tests
Active Tests, also known as Actuator Tests, are bi-directional diagnostic tests
on vehicle systems and component. The tests let you to use the scanner
temporarily activate or control a vehicle system or component, and when you
exit the test, the system/component returns to normal operation.
Some tests display a command to the operator. For example, if “Press Brake
Pedal” displays, the operator has to press and hold the brake pedal and then
continue. The sequence, number and type of tests are dictated by the control
module.
On some systems, the actuator tests cannot be restarted until the ignition key
is switched off for some time. Alternatively, briefly start and run the engine,
shut down, turn the ignition to the run position, then re-initiate the actuator
tests.
IMPORTANT
The tests activate a component, but they do not check if the component is
working correctly. Make sure the components to be tested are in good
condition and correctly mounted.
NOTE
Available tests depend on the control module under test and the vehicle itself.
To start a test:
1. Press Active Test from the menu and a list of available options displays.
2. Select an option to start the test and live data of the selected test displays.
3. Follow on-screen instructions to make proper selections and operations to
complete the tests.
4. Press to exit.
Loading ...
Loading ...
Loading ...