Loading ...
Loading ...
Loading ...
INDEXING
]he spindle pulley contains 36 equalty spaced holes, The
index pin engages with these holes to keep the spindle
from turning white you put a mark on the workpiece,
For example: To locate the position of six spokes in a
wheel:
1, Pull the index pin outward and turn it so that the small
cross pin slips into the slot, This wilt allow the index
pin to engage in one of the holes in the pulley and pre-
vent the spindle from turning.
2. Adjust the tool rest approximately at the centerline
and make a mark.
3, Puiioutthe index pin and slowly rotate the workpiece
until _he pin slides into the next h01e in the pulley,
4iD6 1:his six: times andput the next rnar k on the work-
marks wilt be space d 600 apart. Con-
: t$nue this Operation until six spokes are marked 60 _
aParti :
:
5. Spindle turnings Can be divided in the same manner.
18
Loading ...
Loading ...
Loading ...