Loading ...
Loading ...
Loading ...
1t. Adjust the tool rest approximately 1/8" away from
the corners of the wood and 1/8'" above the center line.
Note the angted position of the tool rest base.
Lock the tool rest base and the tool rest,
TOOL REST
I/8"
WOOD
Look at the speed chart. Notice that a 2" square
turning up to 18" tong should run at 875 R.P.M. for
"roughing" Move the V-belt on the pulleys to the
slowest speed,
Rotate the wood by hand to make sure that the corners
do not strike the tool rest.
17
Loading ...
Loading ...
Loading ...