Loading ...
Loading ...
Loading ...
Stop lifting and insert and lock the second Locking pins
(Safety pins) to prevent the system from going into
compression shifting the tilt of the module, and consequently
of the cluster.
Insert the front locking pins in the proper hole. These are 2
additional pins do not load the weight of the system but
serve to maintain the fixed angle between the modules
especially if they go into compression in very curved systems
Pull out the front and rear pin from the cart and remove it
Remove all locking pins of the second cart cabinets and
preset the splay angles of all cabinets based on RCF Easy
Shape Designer software turning the rear bracket into the
upper module and inserting the pin in the proper position.
Fix the quicklock pin supplied with the speaker in the proper
hole in the front of the last speaker then lower the height of
the system in order to reduce the angle between the speakers
until they join.
SUSPENSION
ANGLE PIN 5°
LOCKING PIN
FOR SUSPENSION
PIN 5°
SECURE THE ANGLE
WITH THE RELATIVE
LOCKING PIN
Loading ...
Loading ...
Loading ...