Loading ...
Loading ...
Loading ...
DUAL PICKPOINT OPERATION
With “Dual pickpoint operation” the vertical
aiming of the array is set by trimming the
hoist motors after the array has been fully
assembled and lifted to its operating position.
PREPARATION OF THE FLYBAR
Place the flybar and remove the side pins from the transport
position. The front bracket will rotate, so lock it. Fix the front
brackets in vertical position locking the pins in position 2.
Recheck the Locking pin is securely locked by briefly pulling
the Locking pin towards you.
SINGLE PICKPOINT OPERATION
(suggested for 8 modules maximum)
Fit the pickup in the proper position number, (suggested by
RCF Easy Shape Designer), and fix the pickup bracket with
the two pins. The position of the pickup defines the vertical
aiming of the entire array.
Check that all the pins are secured and locked
PICK UP POINT POSITIONING
The pickup is asymmetric and can be fit in two positions (A
and B). A position brings the shackle towards the front. B
position allows an intermediate step using the same fixing
holes.
Fix the pickup bracket with the two pins on the bracket’s
lanyard to lock the pickup.
Loading ...
Loading ...
Loading ...