RCF HDL 50-A 4K OWNER MANUAL

Loading ...

RDNet Local

15 -

14 -

13 -

12 H

11 -

10 -

9 F

8 -

7 -

6 -

5 M

4 -

3 -

2 -

1 C

HIGH FREQUENCY PRESET USING RDNet

From the RCF Easy Shape Designer it is possible to export the suggested ﬁlters set to RDNet; after the selection of all the

cabinets in the cluster, by pressing the Load Presets button in the “group” property tab, the user can choose the “.txt”

ﬁle generated by RCF EASY Shape Designer.

For the proper load of the ﬁlters, the group should be composed placing as ﬁrst loudspeaker of the RDNet cluster the

ﬁrst one below the ﬂybar and then all the others. Every cabinet should load a proper HF preset and the entire cluster

should load the same LF preset. Once the presets are loaded, the icon of every module in the cluster shows a green bar

with width directly proportional to the number of the preset loaded in the cabinet (the number is shown besides the

drawing).

As descripted for the Low Frequencies, the user may need to scala up or down the presets set maintaining the

compensation ratio between all the cabinets. This scaling operation can be performed with the arrow button in the

group tab. Even though the presets change is possible on every single loudspeaker, a global change by using the group

properties tab is strongly recommended in order to preserve the air absorption compensation distribution all along the

audience.

HIGH FREQUENCY PRESET USING REAR PANEL ROTARY KNOB

From RDNet the user can have access to all the ﬁfteen presets but, using the loudspeaker rear panel rotary knob, he can

use only four of those ﬁlters. In addition, these “Local” ﬁlters are suggested by RCF Easy Shape Designer software.

HF Preset

Cluster Size Preset

Loading ...

RCF HDL 50-A 4K ACTIVE THREE-WAY LINE ARRAY MODULE