Makita GTR01Z User Manual

Loading ...

9 ENGLISH

Installing or removing the trimmer

base

1. Open the lock lever of the trimmer base, then

insert the tool into the trimmer base aligning the groove

on the tool with the protrusion on the trimmer base.

2. Close the lock lever.

Fig.10

► 1. Lock lever

NOTE: You can use the trimmer base (resin) as an

optional accessory as shown in the gure. When

using the trimmer base (resin), loosen or tighten the

thumb nut instead of opening or closing the lock lever.

Align the rack on the tool with the spur gear on the

trimmer base.

1 3

Fig.11

► 1. Thumb nut 2. Rack 3. Spur gear

3. Attach the dust nozzle to the trimmer base, and

then tighten the thumb screw.

Fig.12

► 1. Dust nozzle 2. Thumb screw

Fig.13

To remove the base, follow the installation procedure

in reverse.

CAUTION: When using the tool with the trim-

mer base, be sure to install the dust nozzle on the

trimmer base.

Loading ...

Makita GTR01Z 40V max XGT Brushless Cordless Compact Router, Tool Only