Makita GTR01Z User Manual

Loading ...

10 ENGLISH

Installing or removing the tilt base

Optional accessory

1. Open the lock lever of the tilt base, then insert the

tool into the tilt base aligning the groove on the tool with

the protrusion on the tilt base.

2. Close the lock lever.

Fig.14

► 1. Lock lever

To remove the base, follow the installation procedure

in reverse.

Installing or removing the o󰀨set

base

Optional accessory

1. Press the shaft lock, then loosen the collet nut.

Fig.15

► 1. Collet nut 2. Shaft lock 3. Wrench

2. Remove the collet nut and the collet cone.

Fig.16

► 1. Collet nut 2. Collet cone

3. Install the pulley onto the tool by pressing the

shaft lock and tightening the pulley with the wrench.

Fig.17

► 1. Wrench 2. Pulley 3. Shaft lock

4. Loosen the screws on the base plate, and then

remove the base plate.

Fig.18

► 1. Base plate

Loading ...

Makita GTR01Z 40V max XGT Brushless Cordless Compact Router, Tool Only