Makita GTR01Z User Manual

Loading ...

12 ENGLISH

To remove the base, follow the installation procedure

in reverse.

NOTE: You can also mount the belt to the pulley with-

out removing the base plate as shown in the gure.

Fig.25

► 1. Pulley 2. Belt

Installing or removing the plunge

base

Optional accessory

1. Open the lock lever of the plunge base, then insert

the tool into the plunge base all the way aligning the

groove on the tool with the protrusion on the plunge

base.

2. Close the lock lever.

Fig.26

► 1. Lock lever

To remove the base, follow the installation procedure

in reverse.

Installing or removing the parallel

ruler on the plunge base

Optional accessory

Insert the guide bars into the holes in the plunge base,

and then tighten the wing bolts. To remove the ruler,

follow the installation procedure in reverse.

Fig.27

► 1. Wing bolt 2. Guide bar

Installing or removing the dust

nozzle on the plunge base

Insert the dust nozzle into the plunge base so that the

protrusion on the dust nozzle ts in the notch in the

plunge base, and then tighten the thumb screw on the

dust nozzle. To remove the nozzle, follow the installa-

tion procedure in reverse.

Fig.28

► 1. Protrusion 2. Dust nozzle 3. Thumb screw

Fig.29

Loading ...

Makita GTR01Z 40V max XGT Brushless Cordless Compact Router, Tool Only