Loading ...
Loading ...
Loading ...
13 ENGLISH
OPERATION
Adjusting cutting depth
To adjust the cutting depth, open the lock lever, then
move the tool base up or down by turning the adjusting
screw. After the adjustment, close the lock lever rmly.
1
2
Fig.30
► 1. Lock lever 2. Adjusting screw
NOTICE: If the tool is not secured after closing
the lock lever, tighten the hex nut, and then close
the lock lever.
1
Fig.31
► 1. Hex nut
Adjusting cutting depth with the
plunge base
Optional accessory
1. Place the tool on the at surface.
2. Select the stopper screw by rotating the stopper
base.
1
2
Fig.32
► 1. Stopper screw 2. Stopper base
3. Loosen the xing nut, then pull up the stopper pole
while pressing the feed button.
1
2
3
Fig.33
► 1. Stopper pole 2. Fixing nut 3. Feed button
4. Push down the tool until the tip of the trimmer bit
touches the at surface, and then turn the xing lever to
secure the tool.
1
2
Fig.34
► 1. Fixing lever 2. Trimmer bit
Loading ...
Loading ...
Loading ...