Loading ...
Loading ...
Loading ...
A-33
MIDI Data Format
F0 44 7E 02 00 [SysExDevID] 40 20 05 0D 00 00 2F 00 00 00
00 il ih 04 00 pp 07 vl vh F7
[SysExDevID] : System Exclusive Device ID : 00H to 1FH,
7FH
The system exclusive device ID is used to identify devices. A
message is ignored if the device ID being sent does not match
the ID of the receiving device. 7FH is a universal device ID,
and messages with this ID are accepted unconditionally by all
devices.
* The explanations for this device are all presented using
the default system exclusive device ID of 10H or the
universal device ID of 7FH.
il : Parameter ID Low
ih : Parameter ID High
pp : Parameters required for part settings
vl : 7bit Low Data :
vh : 7bit High Data : Data lengths up to 14 bits are
supported.
J DSP Type
F0 44 7E 02 00 10 40 20 05 0D 00 00 2F 00 00 00 00 01 00 04 00
00 07 vl 00 F7
vl = 00 : Reflection
vl = 01 : Gate Reverb
vl = 02 : Chorus
vl = 03 : Ensemble
vl = 04 : Delay
vl = 05 : Cross Delay
vl = 06 : Phaser
vl = 07 : Flanger
vl = 08 : Loudness
vl = 09 : Tremolo
vl = 0A : AutoPan
vl = 0B : Rotary
vl = 0C : Distortion
vl = 0D : Auto Wah
vl = 0E : Ring Mod.
vl = 0F : Lo-Fi
Send
This message is sent when a DSP switch operation or other
DSP type switching operation is performed.
Receive
Receipt of this message switches the DSP type.
J DSP On/Off
F0 44 7E 02 00 10 40 20 05 0D 00 00 2F 00 00 00 00 02 00 04 00
00 07 vl 00 F7
vl = 0 : Off
vl = 1 : On
Send
This message is sent when a DSP switch operation or other
DSP function on/off operation is performed.
Receive
Receipt of this message turns DSP on or off.
J DSP Volume
F0 44 7E 02 00 10 40 20 05 0D 00 00 2F 00 00 00 00 03 00 04 00
00 07 vl 00 F7
vl = 0 to 7F :
Send
This message is sent when a function switch operation or
other DSP volume setting operation is performed.
Receive
Receipt of this message changes the DSP volume setting.
J DSP Pan
F0 44 7E 02 00 10 40 20 05 0D 00 00 2F 00 00 00 00 04 00 04 00
00 07 vl 00 F7
Insertion Pan Right Level : Insertion effect pan-pot
vl = 0 to 7F : Value is offset by 40.
Send
This message is sent when a function switch operation or
other DSP pan setting operation is performed.
Receive
Receipt of this message changes the DSP pan setting.
J DSP Chorus Send Level
F0 44 7E 02 00 10 40 20 05 0D 00 00 2F 00 00 00 00 05 00 04 00
00 07 vl 00 F7
vl = 0 to 7F :
Send
This message is sent when a function switch operation or
other DSP chorus send level setting operation is performed.
Receive
Receipt of this message changes the DSP chorus send level
setting.
System Exclusive Message
426-E-125A
PL40NE01-1.book 33 ページ ２００２年７月２３日 火曜日 午後６時５２分
Loading ...
Loading ...
Loading ...