Loading ...
Loading ...
Loading ...
MIDI Data Format
A-22
MIDI Data Format
The channel numbers used for channel messages received
for each part are in accordance with the receive channel
settings for each part made using the instrument’s “MIDI
Rx Ch” parameter. Channel messages are not received for
parts that are turned off using “MIDI Rx Ch”.
When the instrument’s “MIDI In-chord Judge” setting is
turned on, the instrument’s auto accompaniment chord
can be specified by a note message in the accompaniment
keyboard range received over the channel specified by
the receive channel setting for Part 1.
J Note Off
Recognition Format
n..........Voice Channel Number = 0H to FH (Ch1 to Ch16)
kk........Note Number = 00H to 7FH
vv........Note Off Velocity = 00H to 7FH
Remarks
Note Off Velocity value is ignored.
Send Format
n..........Voice Channel Number = 0H to FH (Ch1 to Ch16)
kk........Note Number = 15H to 6CH
vv........Note Off Velocity = 40H
J Note On
Recognition Format
n..........Voice Channel Number = 0H to FH (Ch1 to Ch16)
kk........Note Number = 00H to 7FH
vv........Note On Velocity = 00H to 7FH
Remarks
Normally, the range of the Note Number is 00H to 7FH.
Send Format
n..........Voice Channel Number = 0H to FH (Ch1 to Ch16)
kk........Note Number = 15H to 6CH
vv........Note On Velocity = 01 to 7FH
Format
n..........Voice Channel Number = 0H to FH (Ch1 to Ch16)
kk........Note Number = 00H to 7FH
vv........Pressure Value = 00H to 7FH
Recognition
The effect is configured in accordance with a received
system exclusive message.
Send
Polyphonic Key Pressure messages cannot be sent.
Channel Messages
Note Messages
Byte 1 Byte 2 Byte 3
8nH kkH vvH
9nH kkH 00H
Byte 1 Byte 2 Byte 3
8nH kkH vvH
Byte 1 Byte 2 Byte 3
9nH kkH vvH
Byte 1 Byte 2 Byte 3
9nH kkH vvH
Polyphonic Key Pressure
Byte 1 Byte 2 Byte 3
AnH kkH vvH
426-E-114A
PL40NE01-1.book 22 ページ ２００２年７月２３日 火曜日 午後６時５２分
Loading ...
Loading ...
Loading ...