Loading ...
Loading ...
Loading ...
Warning and safety instructions
13
If the connection cable is damaged it must be replaced with a
special cable of the same type (available from Miele). For safety reas-
ons this work must be carried out by a Miele authorised service
technician only.
This dishwasher is supplied with a special lamp (depending on the
model) to cope with particular conditions (e.g. in terms of temperat-
ure, moisture, chemical resistance, abrasion resistance and vibra-
tion). This special lamp must only be used for the purpose for which
it is intended. It is not suitable for room lighting. Replacement lamps
may only be fitted by a Miele authorised person or by Miele Service.
Correct installation
The dishwasher must be installed and connected in compliance
with the supplied installation sheet.
Be careful before and while installing the dishwasher.
Some metal parts pose a risk of injury/being cut. Wear pro-
tective gloves.
The dishwasher must be correctly aligned horizontally to ensure
problem-free operation.
In order to ensure stability, built-under and integrated dishwashers
must only be installed under a continuous worktop that is secured to
adjacent cabinetry.
The dishwasher must only be built into a tall unit if additional
safety precautions are taken. In order to safely install the appliance
in a tall unit, please use the Tall unit installation set and observe the
installation sheet provided. Otherwise there is the danger of the unit
tipping over.
If you want to convert your freestanding dishwasher to a built-un-
der model and you remove the existing plinth to do so, you must re-
place it with a U-model plinth. Please use the appropriate conversion
kit to do this. This is necessary to avoid the risk of injury caused by
protruding metal parts.
Loading ...
Loading ...
Loading ...