Loading ...
Loading ...
Loading ...
8
MODEL
NO
HP VOLT PH/Hz RPM
(Nom)
NEMA
START
CODE
INSUL.
CLASS
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
CORD
SIZE
CODE
TYPE
CORD
O.D.
± .02 (.5)
in (mm)
WINDING
RESISTANCE
MAIN -- START
2SEV1522L 1.5 240 1 / 60 3450 A F 13.5 31.5 12/3 SOW 0.61 (15.5) 2.15 -- 12.49
2SEV1592L 1.5 200/240 3 / 60 3450 C F 10.8/9.8 27.0 14/4 SOW 0.60 (15.2) 4.22
2SEV1542L 1.5 480 3 / 60 3450 F F 4.9 13.5 14/4 SOW 0.60 (15.2) 17.0
2SEV1552L 1.5 600 3 / 60 3450 F B 3.9 11.0 14/4 SOW 0.60 (15.2) 22.2
2SEV2022L 2.0 240 1 / 60 3450 C F 16.0 42.0 12/3 SOW 0.61 (15.5) 1.26 -- 55.34
2SEV2092L 2.0 200/240 3 / 60 3450 J F 13.2/12 30.0 14/4 SOW 0.60 (15.2) 3.08
2SEV2042L 2.0 480 3 / 60 3450 J F 6.0 15.0 14/4 SOW 0.60 (15.2) 12.30
2SEV2052L 2.0 600 3 / 60 3450 J B 4.8 12.0 14/4 SOW 0.60 (15.2) 19.70
2SEV1522DS 1.5 240 1 / 60 3450 A F 13.5 31.5 12/3 SOW 0.61 (15.5) 2.15 -- 12.49
2SEV1592DS 1.5 200/240 3 / 60 3450 C F 10.8/9.8 27.0 14/4 SOW 0.60 (15.2) 4.22
2SEV1542DS 1.5 480 3 / 60 3450 F F 4.9 13.5 14/4 SOW 0.60 (15.2) 17.0
2SEV1552DS 1.5 600 3 / 60 3450 F B 3.9 11.0 14/4 SOW 0.60 (15.2) 22.2
2SEV2022DS 2.0 240 1 / 60 3450 C F 16.0 42.0 12/3 SOW 0.61 (15.5) 1.26 -- 55.34
2SEV2092DS 2.0 200/240 3 / 60 3450 J F 13.2/12 30.0 14/4 SOW 0.60 (15.2) 3.08
2SEV2042DS 2.0 480 3 / 60 3450 J F 6.0 15.0 14/4 SOW 0.60 (15.2) 12.30
2SEV2052DS 2.0 600 3 / 60 3450 J B 4.8 12.0 14/4 SOW 0.60 (15.2) 19.70
3SEV1522L 1.5 240 1 / 60 3450 A B 13.5 31.5 12/3 SOW 0.61 (15.5) 2.15 -- 12.49
3SEV1592L 1.5 200/240 3 / 60 3450 C B 10.8/9.8 27.0 14/4 SOW 0.60 (15.2) 4.22
3SEV1542L 1.5 480 3 / 60 3450 F B 4.9 13.5 14/4 SOW 0.60 (15.2) 17.0
3SEV1552L 1.5 600 3 / 60 3450 F B 3.9 11.0 14/4 SOW 0.60 (15.2) 22.2
3SEV2022L 2.0 240 1 / 60 3450 C B 16.0 42.0 12/3 SOW 0.61 (15.5) 1.26 -- 55.34
3SEV2092L 2.0 200/240 3 / 60 3450 J B 13.2/12 30.0 14/4 SOW 0.60 (15.2) 3.08
3SEV2042L 2.0 480 3 / 60 3450 J B 6.0 15.0 14/4 SOW 0.60 (15.2) 12.30
3SEV2052L 2.0 600 3 / 60 3450 J B 4.8 12.0 14/4 SOW 0.60 (15.2) 19.70
3SEV1522DS 1.5 240 1 / 60 3450 A B 13.5 31.5 12/3 SOW 0.61 (15.5) 2.15 -- 12.49
3SEV1592DS 1.5 200/240 3 / 60 3450 C B 10.8/9.8 27.0 14/4 SOW 0.60 (15.2) 4.22
3SEV1542DS 1.5 480 3 / 60 3450 F B 4.9 13.5 14/4 SOW 0.60 (15.2) 17.0
3SEV1552DS 1.5 600 3 / 60 3450 F B 3.9 11.0 14/4 SOW 0.60 (15.2) 22.2
3SEV2022DS 2.0 240 1 / 60 3450 C B 16.0 42.0 12/3 SOW 0.61 (15.5) 1.26 -- 55.34
3SEV2092DS 2.0 200/240 3 / 60 3450 J B 13.2/12 30.0 14/4 SOW 0.60 (15.2) 3.08
3SEV2042DS 2.0 480 3 / 60 3450 J B 6.0 15.0 14/4 SOW 0.60 (15.2) 12.30
3SEV2052DS 2.0 600 3 / 60 3450 J B 4.8 12.0 14/4 SOW 0.60 (15.2) 19.70
Winding Resistance ± 5%, measured from terminal block. Pump rated for operation at ± 10% voltage at motor.
Optional - Moisture sensor cord for DS models is 18/5 SOW, 0.47 ± .02 O.D.
Optional - Temperature sensor cord for 3 phase models is 14/3 SOW, 0.53 ± .02 O.D.
Optional - Moisture & Temperature sensor cord for 3 phase DS models is 18/5 SOW, 0.47 ± .02 O.D.
D-3.3) Pump-Down Test:
After the pump has been properly wired and lowered into the
basin, sump or lift station, it is advisable to check the system by
fi lling with liquid and allowing the pump to operate through its
pumping cycle. The time needed to empty the system, or pump-
down time along with the volume of water, should be recorded
on the start-up report.
Loading ...
Loading ...
Loading ...