Loading ...
Loading ...
Loading ...
Installation
EXHAUST HOSE INSTALLATION
1. To remove the exhaust hose, press slightly & pull away from the unit. The
following diagrams indicate the removal of the exhaust hose.
2. If the exhaust hose is loose, twist the tube clockwise to tighten at the base.
NOTE: This unit has a self evaporative system which removes excess condensation
by means of evaporating water collected in the tank. Therefore saving you the hassle
of having to use a drip tray or drainage hose. Please make sure the rubber cap is
locked into position to avoid any leakage.
NOTE: In high humidity areas, there may be excess water condensation produced
that cannot be removed or evaporated. In this instance, the unit will need to be
drained. View the WATER DRAINAGE section for details. The unit will automatically
switch OFF when the internal water tank is full.
9
Loading ...
Loading ...
Loading ...