Loading ...
Loading ...
Loading ...
Error Codes
ERROR CODES
E1 - Indicates open circuit or short circuit in temperature sensor and PCB.
E2 - Indicates open circuit or short circuit in temperature sensor, copper tube and
PCB.
E4 - Indicates the internal water container is full. Refer to the Water Drainage section
below.
Overheat Protection - This unit is tted with an overheat prevention device. If the
unit overheats it will automatically turn OFF. The unit can be restarted after 30
minutes.
WATER DRAINAGE METHOD
When there is excess water condensation inside the unit, the unit will stop running
and the tank full error code "E4" will show on the LED display. This indicates that
the water needs to be drained using the following procedure:
Water Drainage
Manual Drainage:
1. Switch o and unplug the unit.
2. Move the unit to a suitable location to drain
the water. Consider placing a tray or suitable
container under the outlet to catch any water.
3. Remove the drain plug (10) refer to parts
illustration.
4. Slightly tilt the unit to the rear and drain the
water out.
5. Replace the drain plug before next use.
14
Loading ...
Loading ...
Loading ...